4 tips to reduce the cost of using excavator equipment

　　The cost of excavator operation varies greatly in different working environments and operator use costs. Today we will introduce tips on how to reduce the cost of using excavators. Most people will consider fuel economy to reduce the cost of use. After the manufacturer upgrades the engine, the fuel consumption level between brands is very small. So how to reduce costs requires us to reduce the downtime and mechanical failure of excavators during normal work to reduce costs.

　　1. Maintenance and care

　　Regular inspection and maintenance of excavators is also the most critical step. In addition to preventing excavation failures, it can also reduce maintenance costs and downtime. Considering the degree of wear on the equipment in different working environments, the maintenance cycle can be shortened, especially grease, which requires more frequent maintenance to avoid equipment wear. In addition to regular replacement of filter accessories such as engine oil and filter, choose the manufacturer to provide them. If conditions are insufficient, choose a big brand to reduce the risk of use. If there is no way to meet the needs, shorten the use time to avoid insufficient filtration of inferior filter elements and internal wear of the equipment.

　　2. Operation and work

　　Why does the same excavator have a huge difference in the later structure in the hands of different operators? This is because the operator may make mistakes in daily use of the excavator, which shortens the service life of the excavator. Especially in load pressure operation, try to avoid working beyond the capacity. If you must work, avoid long-term pressure load work. Do not work violently. Lubrication is used to reduce wear between equipment structures, but violent operation further aggravates wear. Increased fuel consumption will cause severe impact wear between equipment and cause component failure.

　　3. Reasonable use of throttle

　　At present, new excavators all provide automatic throttles, and can even be adjusted according to different types of work to reduce fuel consumption, but they are more dependent on operators in use. Use to reduce idle time, do not control speed and rhythm according to daily operation during work, and the fuel management system still needs to rely on operator control. If abnormal fuel use is found in daily use, adjust the operation mode to reduce the cost of use.

　　4. Reasonable replacement of wearing parts

　　Replacing wearing parts is the simplest way to reduce the cost of use. It is normal for excavators to wear out during use. If the mode, the worn parts may cause secondary damage to the contact accessories. Only timely replacement can reduce costs. The initial cost of replacing original parts is higher, but compared with inferior parts, they have a longer service life, are more stable and reliable, reduce daily maintenance costs, and reduce structural deformation and wear that may cause mutual damage to other parts.