Four skills are needed to improve the efficiency of excavators

　　How to effectively improve the efficiency and reduce the loss of excavators in daily use? For most people, it may be thought that only the throttle can be reduced to reduce fuel consumption and reduce the cost of daily use. However, for engineering, reducing fuel consumption also means reducing performance. Obviously, it does not bring cost reduction to the excavator itself. If we want to improve efficiency, we need to master the following four skills to optimize performance.

　　1. Improve operating technology

　　The bucket most commonly used in excavator work may only be used by most operators to dig and transport earth or materials, but if the bucket angle can be maintained at a 45° angle, it can minimize the digging resistance and improve efficiency, reduce invalid actions, and avoid repeated digging actions and idling during use. The operator should reasonably plan the sequence of actions required within the working range of the excavator to maintain the flow of work rhythm. Control the engine speed and reduce the engine speed as much as possible in an environment where the work type is relaxed to reduce fuel consumption. Many operators have been keeping the excavator engine at a high speed. At present, many excavator equipment can automatically adapt to the work type, and the system controls the throttle to reduce fuel consumption. However, there are still many operators who like to adjust the engine speed to the maximum in manual operation. It is particularly important to maintain good operation preferences.

　　2. Choose the right tools and accessories

　　Different types of excavators should be replaced with different modes. The excavator system comes with multiple types of working modes to greatly reduce fuel consumption and improve efficiency. By optimizing performance, you can maintain low fuel consumption without losing efficiency. In some types of work, different buckets, breakers, and other tools can greatly improve efficiency. Excavator buckets are divided into standard buckets, widened buckets, narrow buckets, and are mainly used for diversified soil environments and work requirements. The installation and use of other accessories can improve efficiency while replacing many equipment to maximize the efficiency of the excavator.

　　3. Regular maintenance and care

　　Maintenance and care are often mentioned by Tiedou, and are also the most important part of excavator use. No matter how skilled the operator is, the equipment is very advanced, and regular inspection and maintenance are still required. Too many excavators are damaged or stopped due to neglect or delay in maintenance and care. This is the core that should be paid attention to in improving efficiency. The performance, service life, and value retention rate of the excavator rely on the later maintenance and equipment maintenance by 70%.

　　4. Reasonable planning and work flow

　　The excavator will master the required working materials and work content in detail in the working area. The operator can reasonably plan to reduce redundant and tedious repetitive actions, reasonably layout the work for material stacking, use the excavator's ductility to park, etc. Reasonable arrangements will greatly improve efficiency. Excavator route planning is repeated and ineffective for many novice operators. A lot of time and fuel are wasted. Planning the work area for the choice of path to reduce the unnecessary excavator moving distance. In addition to reducing fuel consumption, long-term movement will cause pressure on the moving parts of the excavator. The excavator's walking parts are only short-distance movement. For load movement or long-distance movement, it will cause excessive temperature and internal structure wear.

　　The above 4 skills are very simple for skilled operators, mainly for novice operators who have just come into contact with excavators. For more details about the excavator, you need to ask the operator around you. Only by watching and learning more can you master the skills as soon as possible and maximize the performance of the excavator.